Vol.1 , No. 5, Publication Date: Nov. 13, 2014, Page: 103-106
[1] | Emmanuel Adeleke Fagbemi, Research Operation Department, Rubber Research Institute of Nigeria, Benin City, Nigeria. |
[2] | Agbolahan Okeeseni, Works and Services Department, Rubber Research Institute of Nigeria, Benin City, Nigeria. |
[3] | Baldwin Omonigho, Works and Services Department, Rubber Research Institute of Nigeria, Benin City, Nigeria. |
[4] | Ebike Iseru, Mechanical Engineering Department, University of Ibadan, Nigeria. |
[5] | Teddy Akpovwovwo, Mechanical Engineering Department, University of Ibadan, Nigeria. |
[6] | Emmanuel Kayode Awolola, Mechanical Department, Osun State Ministry of Works, Osogbo, Nigeria. |
This reviewed paper looked at mechanical shaft as one of the major components in any agricultural rotating machines, agricultural products processing equipment, and other agricultural machineries such as oil expeller for processing oil producing agricultural seed, dehulling machines of seeds, and tractors. Types of mechanical shafts considered are, line, jack, flexible, axle, and stub shafts. Also discussed are the functions of mechanical shafts which are not limited to transmission of power and torque, design considerations which are not limited to length of the shaft and material selection. Finally design analyses for shaft power, diameter, and shaft stresses enumerated and defined.
Keywords
Mechanical, Shaft, Design, Agricultural, Machineries and Analysis
Reference
[01] | Robert L. Norton (2000): Machine Design- An Integrated Approach, 2nd Edition, Pretice Hall. |
[02] | Orhan h. Yildiran: MECE 304 Mechanical Machine Elements Shafts - Shafts and Shafts Components, Lectures Notes, McGraw – Hill Companies. |
[03] | REXNORD – Failure Analysis, Installation and Maintenance (Gear, Shafts, Bearings, and Seals). |
[04] | www.pump-zone.com: Cynods Nyberg, EASA Understanding Factors that Causes Shaft Failures |
[05] | Drive shaft: Wikipedia, the free encyclopedia (retrieved 2013) |
[06] | (PVT) LTD, Ramnagar, New Delhi. |
[07] | R.S. khurmi and J.K Gupta, 2004, Theory of Machine, Eurasia Publishing House (PVT) LTD, Ramnagar, New Delhi-110055. |
[08] | R.S. khurmi and J.K Gupta, 2008, Machine Design, Eurasia Publishing House. 509-557 |